15mm Carbon Fiber Tube 1000mm | ID 10/12/13mm | 3K T300 | HaoZhong

Three bore options sit under one 15mm outside diameter: 10mm gives a 2.5mm wall, 12mm gives 1.5mm, and 13mm gives 1mm. All three run 1000mm long in 3K carbon fiber.

• OD: 15mm
• ID options: 10mm, 12mm, 13mm
• Wall by bore: 2.5mm / 1.5mm / 1mm
• Length: 1000mm
• Finishes: twill glossy (15*10), plain matte (15*12), plain glossy or matte (15*13)

Measured across the section, total wall is 5mm on the 10mm bore, 3mm on the 12mm, and 2mm on the 13mm. The choice usually comes down to stiffness against shaft fit: the thick-walled version resists bending over a span, while the thin one trims weight once the insert inside carries the load.

Stock runs at 500mm and 1000mm; anything else is quoted. Custom sizes are accepted from 10 pcs.